AUTONET TV

Automotive Tips from Triple A Automotive: Rotor Problems

The brake rotor, or disc, is attached to your wheel. The brake pads rub on the rotor to slow your car when you are driving in Clovis.

Rotors can warp, crack or become misaligned. They can also be damaged by worn out brake pads that scratch grooves into the surface. These conditions result in less contact surface for the brake pads, leaving you with reduced braking power.

Over time and miles, rotors can also wear down below safe specifications. It is important for Clovis drivers to know that simply replacing brake pads on a wheel with a bad rotor will not solve the problem. Depending on their condition, rotors may be resurfaced or replaced.

Brake noise or a pulsation in the brake pedal are signs of potential brake problems that should be addressed right away. If you have any brake concerns, please have your friendly and professional Triple A Automotive tech perform a thorough inspection.

Give us a call.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

No Strain, No Gain (The Basics of Oil Filters)

Ever wonder what one of the best things is to ever happen to your vehicle's engine?  It's the little thing that usually looks like a can, the oil filter.

Just like your kitchen sink strainer filters out errant particles of food from clogging your drain, the oil filter cleans out small particles that could cause your engine harm.

Your engine operates in a dirty, hot environment and gathers a lot of tiny contaminants like dirt, dust, little metal shards and unlucky bugs that get sucked in.  Get those things circulating in your engine and those little particles can cause friction, which starts wearing out those finely machined metal parts. 

You know how important it is to change your oil regularly.  It's vital that you change your oil filter at the same time to keep the oil as close to brand new as possible.

Most oil filters look like a metal can with some holes in the bottom.  Inside there are carefully chosen materials that can screen out the contaminants while at the same time allow the lubricating oil to pass through.  Early oil filters had steel wool, metal mesh or actual screens.  Then they tried fabric filters using material such as linen and cotton.  Finally, a less expensive disposable filter using paper and cellulose did the trick.

Cellulose or other synthetic media are used in most oil filters today.  Cellulose is inexpensive and effective.  Fibers filter out particulates and let the oil flow.  The other synthetic media have the ability to screen out even tinier particles while not significantly restricting the oil from getting through.  Engineers continue to work on even more advanced filter material.

Choosing the right oil filter is something our pros at Triple A Automotive can help you with  because there are a lot of them out there.  Factoring into that decision are your driving habits, how far you drive and the temperatures to which your engine will be subjected.  While some filters will cost more than others, they may be worth it to extend the life of your engine. 

But most important is remembering to come have your oil changed at Triple A Automotive regularly at the intervals recommended by the vehicle's manufacturer. Just like you wouldn't want to have a plumber come over to fix a clogged kitchen drain, you certainly wouldn't want to have to pay for major engine repairs if they could be prevented by regular oil and filter changes.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Put the Brakes On! (Brake Caliper Replacement)

Keeping your vehicle's brakes in top shape is one of the most important things you can do for your safety and those on the road with you. Most drivers know a little about brake pads and rotors but maybe not so much about another brake component called the calipers.

Disc brakes work by a mechanical system that presses your brake pads against discs called rotors (you can usually see these discs through your wheels). The friction stops your vehicle smoothly when everything is working the way it should.  The calipers use the hydraulic pressure of the brake fluid to apply the stopping power. 

After they've been on your vehicle for a while, the calipers can get stuck or wear out.  If calipers on one side of the vehicle work correctly and not on the other, you might feel a pull in one direction.  You might feel the same kind of pull if the caliper is stuck and is applying constant pressure.  You might hear scraping or squealing coming from a stuck caliper and you might smell burning on that side.  The friction from a caliper that's always applying pressure may cause that wheel to heat up, so after you've pulled your vehicle off the road safely, the wheel with the stuck caliper will might feel hotter than the others

Because there are many different components to the brakes, it's best to leave the diagnosis and repair to a trained technician. They will run each wheel through a series of tests and inspections that can pinpoint the problem.  Sometimes it involves more components than just the caliper that may need changing at the same time.

The best way to make sure your brakes will perform well is to is to have our service center perform regular inspections and follow the vehicle manufacturer's recommended service.  That way your brakes will be ready, willing and able when you call on them to put a stop to things.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

'Tis the Season (Tires)

We all know about winter tires.  But did you know there is such a thing as summer tires?

Most people have all-season tires on their vehicles.  They work pretty well in a variety of weather conditions.  But if you want better handling and performance, you might consider switching to summer tires.  Here are a few things you should know about them.

Summer tires are good for high-performance vehicles like sports cars and luxury SUVs, but they don't have to be limited to those. They have a different tread pattern than all-season tires, with generally shallower grooves and more rubber that contacts the road.  The rubber is made of a stickier compound good for taking corners at higher speeds.  Plus it is engineered so it stays firmer the hotter the temperature gets. 

Here's a bonus.  That design also works well in warm, wet weather.  It makes sense, since more the more rubber that's touching the concrete or asphalt when it's slippery out, the better the traction. 

There are some things to be aware of with summer tires.  They often have asymmetrical or unidirectional tread patterns.  That sometimes limits the way these tires can be rotated on a vehicle.  Another thing to remember is it is NOT a good idea to use summer tires in any wintery conditions.  They lose traction as the temperature heads toward the freezing range and below since that rubber that's designed to stay firm at warm temperatures gets hard as a rock when they freeze.

But in warmer weather, summer tires can increase your braking and cornering capabilities.  Plus you'll notice more grip at faster speeds and higher temperatures than all-season tires.  So think about discussing summer tires with your service advisor to see if they'd be a good fit for the type of driving you do.  He or she will offer you some choices that are designed to meet your vehicle's specs.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com