AUTONET TV

Read a Good Tire Lately? (Tire Wear)

There's lots of good information to read in books and online.  You might not know that you can also "read" your tires and learn a lot about what shape they're in and if they are in need of attention. It's important to know how your tires are doing because a tire failure can be very dangerous to you, your passengers and others on the road near you.

You read your tire by looking at the surface that rides on the road, where the tread is.  Check out the outer and inner edges.  If you notice there's more wear on the inner or outer edge than on the rest of the tread, your vehicle could be out of alignment.  Wear on an inner or outer edge could mean your wheels are leaning too much to one side.  When you see this, visit our service center soon to have the alignment checked.

What about if both edges are worn? That could be a sign that you don't have enough air in that tire.  In an underinflated tire, the middle is not contacting the road surface as much as the edges, so the edges wear down first.  It could also mean that you're taking corners too aggressively or your tires haven't been rotated on a regular schedule.

Another thing you might see on your tires' tread area is wear in the center of the tire.  That means you likely have too much air in that tire.  Too much air makes your tire contact the road in the middle more than on the edges so the middle wears down prematurely. 

You might also see some smooth spots on the tread in irregular spots. This is called cupping. This is sometimes caused by suspension problems. A technician can examine your suspension to see if it is up to the manufacturer's specifications.

Finally, you may spot tires that are worn unevenly in a pattern that goes diagonal to the tread pattern.  This could mean your tires are out of balance, something our service center can check. They might also check alignment at the same time.

Your tires are the only part of your vehicle that contacts the road surface.  That means your acceleration, traction, steering and braking are all dependent on your tires being healthy. Maintain your tires by having one of our trained technicians read the clues and making sure they're always in roadworthy shape. 

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Catalytic Converter Replacement

Many of us have become aware of how important it is to keep our planet’s air clean, and your vehicle has a key component that helps do just that: the catalytic converter.  It’s in the exhaust system, and its job is to superheat unburned, harmful byproducts in the exhaust, so they don’t get spewed out into the atmosphere.

There’s another important purpose the catalytic converter has: it improves your vehicle’s efficiency. 

Most of us don’t give the catalytic converter much thought until it breaks or someone steals yours, something that’s been happening much more frequently in recent years.  The reason people steal them is that catalytic converters use precious metals such as platinum, palladium, and rhodium to do their job. So, they contain valuable materials thieves can sell.

The most likely reason you will have to replace your catalytic converter is age.  The more distance your vehicle travels and the more hours your engine runs, it’s putting wear and tear on the converter.  T

You can tell if your catalytic converter is failing by looking out for these signs:

• Smell of rotten eggs inside your cabin or outside near the exhaust
• Check Engine light is on
• Vehicle power isn’t what it used to be, or fuel economy has plunged
• Vehicle backfires

If you need a new catalytic converter, it can be replaced with an original equipment part if it’s available, or an aftermarket converter can be welded into the exhaust pipe.  It’s not uncommon for oxygen sensors to need replacing as well.  The technician will also check for other problems in your powertrain that may have contributed to your converter failing.

Check to see if an emissions test is required where you live.  If it is, you will have to have a properly functioning catalytic converter to pass it.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Wash Me, Wash Me Right (How to Wash a Vehicle)

Most would agree they'd rather drive around in a clean, shiny vehicle than one coated with a layer of dirt.  When warmer weather comes around, some of us are bound and determined to wash our own vehicles.  And to protect the paint and its luster, there are a few things to keep in mind when you get out the bucket and soap.

• Cool body.  It's not a good idea to wash a vehicle when the body is hot.  If it's been sitting out in the sun or you've been riding around on a sunny day, make sure you cool your vehicle off by either moving it to the shade or wetting it down with cool water. The problem with washing a hot vehicle is that it's going to dry so fast, minerals in the water can form hard-to-remove spots on the paint.  And some of those can be really difficult to get out.  Best to avoid it.
• Slippery when wet.  Make sure you wet your vehicle down thoroughly before you get the washing mitt out.  Experts keep a couple of buckets of soapy water on hand, and they use soap especially engineered to remove dirt from a vehicle without stripping off the wax that might be on it. 
• The washing mitt.  Experts say to use a mitt with hundreds of moisture-absorbing strands on it.  Start washing at the top and move down.  If you keep dipping the mitt in the buckets frequently, a minimal amount of dirt will stick to it and that will prevent scratching the paint. 
• Wheels last.  Wait until you've finished washing the body before washing the wheels.  Some detailers prefer special wheel-washing tools or brushes. 
• Rinse it well.  Hose the vehicle off thoroughly to get all the soap off, then dry immediately.  Some people swear by a chamois, others like cloth better.  Cotton or microfiber towels will do.  

The next time you have your vehicle in for maintenance, you might ask your service advisor for recommendations on vehicle washing accessories.  They are usually up on the brands that produce the best results.  You may not be a detailing pro, but there's no reason your vehicle can't look like you are.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Cruisin' on Down Main Street

When automakers first came out with cruise control, it was a real luxury item.  The older cruise controls used a mechanical vacuum system but it worked.  Well, some of the time. 

Now days, cruise control is all electronic, thanks to computers.  It's reliable and a real convenience on long trips.  Cruise control is offered on most vehicles and standard on a lot of them.  Because it's electronic, when it breaks, it's usually some electronic component.  Your vehicle's cruise can be the victim of a blown fuse. Or your vehicle's speed sensor, which—not surprisingly—measures your vehicle's speed, can also stop working.  And that will cause your cruise to stop cruising. 

Vehicles with cruise control also have a built-in feature that, when the brakes are applied, turns off the cruise.  With electronic cruise control, that happens thanks to the brake pedal switch, and if a problem develops in that switch, the cruise might not work.

The newest cruise control is called "adaptive." What that means is that it will maintain your vehicle's speed as well as the distance between you and the vehicle ahead of you.  That means if a car ahead of you slows down, your vehicle will slow down to the same speed and even stop if the car ahead stops.  Pretty cool, right? As you can imagine, adaptive cruise control is more sophisticated and has many more components than standard cruise.  The systems vary from manufacturer to manufacturer, but they use on-board radar units and cameras to calculate what your vehicle should do to maintain a safe distance and speed. 

Finally, there are still some of the older style cruise controls out on the roads.  They'll stop working when the vacuum actuator develops a problem, a vacuum hose starts leaking or breaks or the cable between the actuator and the throttle kinks, breaks, seizes up or becomes detached. 

If your cruise control isn't working, your service repair facility will be able to determine what kind your vehicle has and what it will take to fix it.  Good news for the cruise blues.