AUTONET TV

Too Hot to Handle (Vehicle Overheating)

In the hot weather, seeing steam coming from the engine compartment is something we all dread.  No one wants that to happen to them. But if you know the signs of overheating and how to deal with it, you may be able to reduce the risk of damage to your vehicle, maybe even prevent getting stranded on the road.

Besides the steam coming out of the engine compartment, here are a few signs of overheating.  Your vehicle has a heat gauge that may have a needle that can go into a red zone or up to the "H" (for High) position.  You may smell odors, perhaps a burning (could be hot oil) or a sweet smell (engine coolant leaking). 

When you encounter any of those signs, you know you have to do something to keep the engine as cool as possible to avoid potentially catastrophic damage.  Turn off the air conditioning and turn up the heat.  While that last part may sound odd, it helps draw heat out of the engine. 

If you can do it safely, pull off the road to a spot away from traffic.  Turn off the engine so it can cool down for a few minutes.  You may want to call for help at this point, then switch on the key to "accessory" position to see if the engine has cooled down to the normal range.  You may have to have your car towed to a service facility or, if there's one nearby, you may be able to slowly drive to it.  But keep your eye on the heat gauge and immediately stop if it starts to overheat again. 

The best hedge against engine overheating is regular maintenance.  When the cooling system and other engine components are working like they should, your chances of an overheated engine are drastically reduced.  Your service facility will keep their eyes open for leaking hoses, cracked belts, rusted pipes and other things so they don't fail at the most inopportune time.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Visibility Disaster! (Windshield Washer Pump Replacement)

Let's say you live in a cold climate where the snowy, icy weather challenges you to clear the salt and debris tossed up on your windshield.  You push your windshield washer switch expecting a good stream of fluid so the blades can wipe the glass clean. Yet nothing comes out.  Nada, zip.  What's going on? You know you filled up the windshield washer reservoir within the last week or so. 

Well, there could be a few things causing your windshield washing system to fail.  One culprit? The hoses that are supposed to carry that fluid from the washer pump to the spray nozzles may be frozen, or maybe they're cracked and leaking. It could be the nozzles themselves are stopped up, either iced up or jammed full of debris.  Your windshield wiper/washer switch could be worn out or the electrical system may not be conducting power to the washer pump. 

It's important that this system work properly, especially on days when the sun may be in front of you and your windshield is covered with a cloudy, icy mess.  Seeing what's going on in front of you may be like trying to peer through frosted glass, and that's not a safe situation for you or the drivers around you. You need to have this checked out by a technician as soon as you can.

Let's say the technician discovers it's not any of those components.  Turns out it's the electric windshield washer pump itself that's failed. After replacing it, everything is working fine, and you can see again.  As so often is the case with today's complex vehicles, figuring out the root cause of a problem can be tricky.  Rely on your vehicle service facility since they have the know how and diagnostic equipment to make sure your view of the road will always be crystal clear.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com