AUTONET TV

Steer Me Right! (Failing Power Steering Hose)

Most drivers love how easy it is to turn their vehicles, and they have power steering to thank.  Engineers have figured out a way to take some of your engine's power to help you turn. Without it, steering can be quite a chore.  New power systems are electric, but there are still plenty of the older hydraulic power steering systems out there, and it's wise to keep them working the way they should so you don't find yourself stranded without power steering.

Those hydraulic power systems use a fluid under pressure that is pumped to a device that helps you turn your wheels more easily.  It's that pressure that presents the challenge.  After your vehicle's seen a few years on the road, you may find your steering isn't quite as easy as it was.  You may hear a groaning or humming sound when you turn. 

One component that can fail is the pressure hose that carries that fluid from the power steering pump to that turning assist mechanism.  The hose is made of rubber and can leak, crack, get damaged by heat and debris or just get too old.  If yours is ten years old or older, it's likely getting close to the end of its life.

If you think you can just wait until it fails completely, think of these possible consequences.  If the hose or a coupling fails, power steering fluid can blow all over the hot engine.  That fluid is flammable and can start a fire.  Or if you've been driving for a few weeks with low power steering fluid, that could ruin your power steering pump. Replacing the pump is an extra expense you can probably  live without.

A technician will replace the necessary parts and make sure air and contaminants are bled or flushed from the system.  Then, he or she will check for leaks.  Just think how important a properly working power steering system is for safe operation of your vehicle.  Make sure you keep yours in top shape for your safety's sake and the safety of others on the road around you.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

More than Pads and Rotors (Brake Caliper Replacement)

You might be familiar with brake pads and rotors, two components of your vehicle's brakes that have to be regularly serviced.  Here's another important component of your brakes: the calipers.

Calipers are used in disc brakes, the type of brakes now found in most recently manufactured vehicles.  A caliper is the part of the brakes that squeezes the brake pads against the discs, or rotors, which turn with your wheels. 

There are different kinds of calipers, but the basic principle is the same.  You press down the pedal, brake fluid activates a piston or pistons that squeeze the brake pads against the disc and the friction slows down your vehicle.

While modern vehicles have a warning system to let you know it's time to get your brakes checked, your brake light usually goes on when your fluid level is low or your fluid pressure is low.  But you may have to look out for signals your calipers are the problem. 

If your vehicle pulls to one side when you brake, that could be a sign that one caliper isn't working right.  If you smell a burning odor coming from a wheel after a trip, there might be too much pressure from a caliper.  Grinding or squealing when you brake is another signal that it may be time to bring in your vehicle so we can check your brakes.

One way to minimize brake issues is regular inspection.  Have them periodically looked at when you bring in your vehicle for an oil change.  The good news is brake issues are more likely to be caused by pads or rotors wearing out.  Calipers last a lot longer, but even they will need replacing every so often.  

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Mercury Rising (Hot Weather Vehicle Concerns)

The heat is on, and your vehicle takes a beating when it is.  Several of your vehicle's systems are under extra stress in hot weather, so here are a few to make sure are getting the care and maintenance they need.

It makes sense that the cooling system is one to make sure is in top shape.  Vehicle breakdowns in summer are often due to a problem with one of the cooling system's components.  Coolant levels have to be up to specs, the ratio of coolant to water must be correct and the hoses, pumps, belts and radiator must all be working properly in order to prevent vehicle overheating.

Summer is also hard on your air conditioning system.  You might find that no air is blowing out of the vents or maybe only hot air is coming out.  Air conditioning equipment is best diagnosed and repaired by a trained and experienced technician.  The problem could be in any number of components, including the condenser, compressor or blower motor.

You may think the battery gets a break in the summer, but heat will shorten the life of your battery more quickly than cold.  Your service facility can analyze the condition of your battery and tell you whether it's healthy or needs replacing.

Tires take a beating in heat, too.  Pavement can be scorching hot, and the sun's rays break down the rubber.  Watch inflation pressure in hot weather, too, since air expands the hotter it gets.  Your technician can check air pressure, tread depth, cupping and other uneven wear and diagnose the source of any problems. 

And don't forget brakes.  One video online says brakes on a car that were driven hard on a track reached temperatures as high as 500°C/932°F.  Heat can reduce stopping power.  A technician should periodically inspect pads, rotors, drums, lines and other components to find a problem before you lose the ability to stop.

Finally, engine oil is really put to the test when it gets hot.  Your vehicle service facility will make sure you have enough oil and the proper kind to keep your engine's components properly lubricated.  Help your vehicle beat the heat.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Restore Your Get-Up-and-Go (Fuel and Air Induction Cleaning)

You may have heard the old saying, "My get-up-and-go got up and went." If your vehicle's engine's fuel economy is noticeably worse, your engine is idling roughly or stalling or your vehicle's acceleration isn't what it used to be, ask your service advisor if you might need your vehicle's fuel and air induction systems cleaned.

As the hours pile up on your engine, carbon deposits can build up.  It's not unusual for some of the impurities and additives in fuel to leave behind a black residue that eventually will negatively affect your fuel economy and performance. Maybe you're noticing your engine is harder to start, you hear knocking or pinging in your engine and your vehicle just doesn't have the pep it used to.

While it's a sophisticated process with a lot of components, a gasoline engine essentially produces power by drawing in air from the outside and mixing it with fuel in the cylinders where this blend of fuel and air is ignited by spark plugs in synchronized explosions.

The fuel and air enter your engine through the fuel induction system and air induction system. Because of things like high operating temperatures and impurities, carbon in the fuel can leave behind dark, sooty deposits in the fuel induction system such as the fuel injectors and the throttle body. These and other residue reduce your engine's efficiency and performance. Our service center can use special fuel injector cleaners to remove those deposits from your engine.

The technician may manually clean some of the deposits and also put a fuel additive in the fuel tank that will get rid of other deposits that are still in the fuel system

Keeping the air induction system clean is also important.  A technician can use a liquid cleaner specially designed for the job. Not only can this improve your fuel economy, it may also reduce exhaust emissions and help your engine last longer.

Most gasoline now contains detergents that help reduce or prevent these problems, but direct injection is now being used in more vehicles that are more susceptible to clogging. Ask your service advisor if your vehicle could benefit from fuel and air induction cleaning. 

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com