AUTONET TV

The Economy of Maintenance for Clovis Drivers

Do I keep my old vehicle or buy a new one? It's a question most Clovis drivers ask themselves at some time or another.

Generally, what it comes down to is the choice between a car payment and the possibility of repair bills. Most of the time, we want to choose the car payment because we don't like the inconvenience and uncertainty of vehicle repairs. But that payment has a detrimental effect on our budget and bank account.

Edmunds.com is a great website to help you with your decision. This site uses repair histories to calculate the average repair bills for specific makes and models of cars. You can plug in the information for your vehicle and get an estimate on what it will probably cost you to continue owning that vehicle.

Now, Edmunds.com isn't a crystal ball. It can't know what will happen to your specific vehicle. But it can guide you in knowing how much money to budget for the repair and maintenance of your vehicle. Ultimately, that can help you in your decision to buy a new vehicle or wait a few years.

For example, a five-year-old Camry V-6 is projected by Edmunds.com to cost about $96 a month, on average, to repair and maintain (at the time of this writing). Remember, maintenance costs are part of vehicle ownership, whether it's a new vehicle or an old one, so the projected cost for repairs on your five-year-old Camry average out to only about $50 a month. That's a whopping lot less than a new car payment.

If your vehicle is older than five years, you should also talk to your friendly and knowledgeable professional at Triple A Automotive about its future. They are more familiar with the average cost of repairs for vehicles in your area and of specific problems they commonly see in particular vehicles. More importantly, they know you and they know your car. They can give you a heads-up on what repairs you may be facing in the near future.

Remember, the older your vehicle gets, the more important preventive auto maintenance becomes. Over time, vehicles accumulate wear and debris, and we just have to give them a little more attention. Getting to know your vehicle and its peculiarities is also good auto advice for Clovis drivers.

If you decide to keep your older vehicle, you may want to talk with your Triple A Automotive service advisor about fluids specially formulated for older engines. These motor oils, transmission and other fluids are designed to clean older engines and automotive systems and recondition their seals and gaskets.

Good care at Triple A Automotive in Clovis will keep your older vehicle on the road in CA. And that may be just the boost you need in this uncertain economy. It may even save you enough to be able to afford that new vehicle you've been dreaming about.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Breathe New Life into Your Engine (MAF sensor replacement)

If you’ve noticed your vehicle is hard to start, stalling, or has lost power, the culprit may be a part with an odd name: the MAF sensor.  You may have never even heard of a MAF sensor, but it’s important that it be working correctly, or you may be experiencing some fairly significant engine issues.

All vehicles bring in air and direct it through an air filter before it goes into your engine, where it mixes with fuel to provide power to get you going. There’s a tube-like device with a sensor inside it that measures how much of that mass of air is passing through. That’s why it’s called a mass air flow sensor, or MAF sensor.  If the MAF sensor isn’t working right, the engine’s computer can’t figure out the right amount of fuel to mix with it, and your engine may hesitate or stall.  Sometimes this will cause your Check Engine Light to come on, and any time it does that, make sure you have your vehicle checked by a professional, so you’ll know what’s going on.

When you take your vehicle into your service facility, a technician will thoroughly check the system to see just where the problems are.  If your air filter is dirty, your MAF sensor may get dirty too, which might be causing the problems.  You may find your fuel economy isn’t what it used to be either.

There are other things that can cause the same symptoms, too, such as a leak in a vacuum hose. It’s also possible that the electrical connector between the MAF sensor and the engine has broken. 

The technician can use electronic diagnostic equipment to help pinpoint the exact problem or problems, replace worn parts, and test drive your vehicle to make sure it’s working correctly.

It’s also a good idea to make sure your air filter is changed regularly. A dirty air filter can contribute to a MAF sensor failure. One of the big benefits of having your vehicle regularly maintained at one facility, is they know your vehicle. So, they keep track of which of your vehicle’s parts should be periodically replaced before problems develop. 

If you keep clean air heading into your engine, it can help your engine work efficiently, and with the power it was engineered to deliver. Isn’t that a breath of fresh air?

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Hold the Oil! (Oil Pan Gasket Replacement)

You've likely heard how important oil is to your vehicle's engine. Did you know that there's one part that's responsible for holding that oil so you can use it every day? It's called the oil pan, and it sits at the bottom of the engine.

The oil pan is a vital, though simple, part of your engine's lubrication system. Oil circulates through parts of your engine to keep them lubricated. It reduces friction so everything works smoothly. Without oil, friction would quickly destroy your engine. The oil pan keeps that oil contained in the lubrication system, so it's important that the oil doesn't leak out. Since it's a metal part attached to another metal part, there is a gasket between the oil pan and the part of the engine it attaches to.

Various things can put stress on the oil pan and gasket, including weather extremes, the speed you're traveling and the condition of the oil. You may drive over a couple of bad roads and kick up debris onto your oil pan. All this wear and tear, heat and time can take their toll. So after a while, the gasket can just wear out and start leaking. It usually starts pretty slowly. If you see oil visible under your vehicle where you park it, that might be a sign of a leaky oil pan gasket. Another sign? You smell burning oil coming from your engine. If the leak is bad and your engine has lost a lot of oil, you may eventually see the oil light go on.

Let your service advisor know if you are experiencing any of these things. Driving with insufficient oil can badly damage your engine. And it can do it quickly. A Triple A Automotive trained technician will check to find the source of the leak. It may just be a gasket, but it also could be the oil pan is damaged and needs replacing as well.

This is a repair you should get taken care of. Your engine needs its lubrication system intact to provide you many years of service.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Start Me Up (Ignition Systems)

When you start up your gasoline engine car, you may not know that it's using the same ignition principles as it has for decades.  You have spark plugs that require enough power so a spark can jump across a gap at its tip.  Years ago, a vehicle's 12-volt system had to produce 15,000-25,000 volts to do that, so engineers came up with something called an ignition coil that bumps up the voltage. It also has to be done at just the right interval called timing.

The first systems had a distributor, a mechanical device with a rotating disc that switched the power to the ignition coil on and off.  That higher voltage then was sent to the spark plugs at the correct time interval. But the mechanical "points" had to be replaced and adjusted every 12,000 miles/20,000 kilometers.  Engineers later replaced the switching mechanism with solid state ones, but they still needed replacement after 120,000 miles/200,000 kilometers.

The next evolution came in the 80's when the distributor was replaced with a couple of sensors which talked to a computer.  This "DIS" (distributor-less automotive ignition system) was a big advance.  Plus, it didn't use just one ignition coil for all the cylinders.  It had coil "packs" that each provided spark to two cylinders.  That way, the voltage could be boosted even higher, to 30,000 volts, which helped engines be able to ignite a leaner fuel/air mixture.

Recently have come even more improvements.  Now instead of coil packs, there's a coil that's attached to each spark plug.  No more spark plug wires means less maintenance. Plus, a stronger, hotter spark of 50,000 volts can make an engine more reliable, increase fuel economy and reduce emissions.

No matter what ignition system your vehicle uses, your vehicle service facility has a staff of technicians trained to work on the latest technology.  Make sure to have your vehicle maintained regularly so you can take full advantage of these modern engineering marvels.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com